產品說明Product description |
一款高分子復合改性材料，適合流延成型。 A polymer composite modified material is suitable for tape casting. |
關鍵特性Key characteristic |
1.表面亮，手感舒適干爽。bright surface，dry and comfortable touch 2.成型快，不粘模 rapid molding，non-stick mold 3.易著色easy to coloring |
功能Function |
產品應用 Main application | 玩具產品Toy products |
|
流延膜 Cast film |
|
加工方法Processing method | 注塑成型Injection molding 流延成型 Tape casting |
環保認證 Environmental certification | ROHS | REACH | EN71-3 |
PAHS | ASTM-F963 | Phthalate |
顏色Color | 本色 Natural |
氣味Smell | 少許樹脂味A little resin smell |
外型Appearance | 圓球形小顆粒Cylindrical particle，about 3mm×1.5mm |
儲藏期Storage period | 常溫下通風干燥，24個月Ventilated dry at normal temperature，about 24 months |
包裝方式Packaging method | 25公斤/袋 25kg/bag |
物理性能Physical properties | 結果Result | 單位Unit | 方法Method | 成型條件Molding condition |
比重Specific gravity | 0.93±0.02 | g/cm3 | ASTM D792 | 干燥溫度Drying temp 70℃ |
硬度Hardness | 60±5 | shoreA | ASTM D2240 | 干燥時間Drying time 2Hours |
拉伸強度Tensile strength | >2 | Mpa | ASTM D412 | 射嘴溫度Nozzle temp 190℃ |
斷裂延伸Elongation at break | >350 | % | ASTM D412 | 螺筒一段溫度Screw 1 temp 180℃ |
撕裂強度Tearing strength | >12 | Kn/m | ASTM D624 | 螺筒二段溫度Screw 2 temp 170℃ |
熔融指數Melt index | 6±3 | g/10min | ASTM D1238 | 螺筒三段溫度Screw 3 temp 160℃ |
注意事項Matters need attention |
清洗料管 Purge compound | 需使用PP或 PE清洗干凈機臺螺桿，且把機臺射嘴徹底清除干凈please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean |
著色 Coloring | 請選擇以PE或EVA為基材之色母，切勿使用以PVC為基材者。另外加工時請采用較高的螺桿轉速和較高的背壓，才能讓著色劑達到較好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion |
回收 Recycling | 二次料（水口料）回收比率建議最多10%。 Consistent regrind usage of up to 10% is permissible |
共有-條評論【我要評論】